{"product_id":"hsd-flight-2000mm-cessna-182-pnp-red","title":"HSD Flight 2000mm Cessna 182 PNP Red","description":"\u003ch3\u003e\u003cstrong\u003eHSDJETS 2000mm CESSNA-182 PNP – Red\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe HSDJETS 2000mm Cessna-182 is a large high-wing propeller aircraft designed for stable handling, smooth scale flying, and confident everyday sport performance. Its 2000mm wingspan, functional flaps, integrated LED lighting, and fixed all-metal tricycle landing gear give the aircraft a substantial presence in the air while maintaining predictable flight characteristics.\u003c\/p\u003e\n\u003cp\u003eThe airframe is constructed from HSD’s lightweight \u003cstrong\u003eAeroCore 35 Sport EPO\u003c\/strong\u003e. This material provides a practical balance of manageable weight, structural durability, and efficient flight performance. The large wing area and high-wing configuration contribute to stable handling, while the functional flaps help slow the aircraft for controlled approaches and shorter landings.\u003c\/p\u003e\n\u003cp\u003ePower is provided by a factory-installed 5055-500KV brushless motor, Hobbywing 80A ESC, and 14.5 × 7 three-blade propeller. HSD recommends a 6S 5000–6000mAh 45C LiPo flight battery, delivering strong takeoff and climb performance with an estimated flight time of approximately 8–10 minutes depending on battery selection, throttle use, weather conditions, and flying style.\u003c\/p\u003e\n\u003cp\u003eThe HSD MFC-2065 multifunction control system organizes the aircraft’s installed electronics and simplifies receiver integration. Six high-voltage metal-gear servos operate the ailerons, flaps, elevator, and rudder. A separate 2S receiver battery powers the control system independently from the main propulsion battery.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePlug-N-Play Configuration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe PNP version includes the aircraft with the brushless motor, ESC, servos, MFC control system, LED lighting, and primary flight electronics installed. The customer must supply and install a compatible transmitter, receiver, flight battery, receiver battery, and LiPo charger.\u003c\/p\u003e\n\u003cp\u003eBecause radio systems and receiver installations vary, the pilot is responsible for completing receiver installation, channel assignment, control setup, failsafe programming, range testing, center-of-gravity verification, and all required preflight checks before operating the aircraft.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAeroCore 35 Sport EPO\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Cessna-182 uses HSD’s lightweight AeroCore 35 Sport EPO construction. This material is designed for electric sport aircraft where efficient performance, manageable wing loading, and predictable handling are important. The lightweight structure allows the Cessna-182 to deliver a large-aircraft flying experience without unnecessary airframe weight.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStable High-Wing Performance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe high-wing layout and generous wing area help provide stable, confidence-inspiring flight characteristics. The Cessna-182 is well suited for relaxed scale flying, touch-and-go practice, smooth pattern work, and general sport operation from a suitable runway.\u003c\/p\u003e\n\u003cp\u003eFunctional flaps expand the aircraft’s operating envelope by allowing slower approaches and more controlled landings. The all-metal fixed landing gear provides a rugged foundation for repeated takeoffs and landings, while optional floats and an electromagnetic brake system allow the aircraft to be adapted for different flying environments.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eMFC-2065 Control System\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe factory-installed HSD MFC-2065 provides a centralized connection point for the aircraft’s controls and optional equipment. Four supplied receiver signal leads connect the customer’s receiver to the MFC system for throttle, aileron, elevator, rudder, flap, and other supported functions according to the aircraft manual and radio setup.\u003c\/p\u003e\n\u003cp\u003eThe MFC and installed servos use a separate 2S receiver battery. This independent control-power arrangement keeps the receiver and servos powered separately from the primary 6S propulsion battery.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eLarge 2000mm high-wing RC propeller aircraft\u003cbr\u003e Plug-N-Play configuration with installed power and control electronics\u003cbr\u003e AeroCore 35 Sport lightweight EPO airframe\u003cbr\u003e Stable and predictable high-wing flight characteristics\u003cbr\u003e Functional ailerons, elevator, rudder, and flaps\u003cbr\u003e Factory-installed LED lighting system\u003cbr\u003e HSD MFC-2065 multifunction control system\u003cbr\u003e 5055-500KV brushless outrunner motor\u003cbr\u003e Hobbywing 80A electronic speed controller\u003cbr\u003e 14.5 × 7 three-blade propeller\u003cbr\u003e Six high-voltage metal-gear servos\u003cbr\u003e Separate 2S receiver-battery power system\u003cbr\u003e All-metal fixed tricycle landing gear\u003cbr\u003e 56.1dm² wing area\u003cbr\u003e Approximately 8–10 minutes of estimated flight time\u003cbr\u003e Approximately 10-minute final assembly estimate\u003cbr\u003e Optional electromagnetic brake system available separately\u003cbr\u003e Optional float set available separately\u003cbr\u003e Optional reinforced gyro configuration available separately\u003cbr\u003e Matte water-based paint and decal finish\u003cbr\u003e Blue-and-white scale-inspired color scheme\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePNP Completion Note\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis aircraft does not include a transmitter, receiver, flight battery, receiver battery, or battery charger. A compatible radio system with at least six channels is required. Review the aircraft manual and confirm all required equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eThe aircraft requires final assembly, receiver installation, radio programming, battery installation, center-of-gravity adjustment, control-direction verification, range testing, failsafe testing, and a complete preflight inspection before operation.\u003c\/p\u003e","brand":"HSD Jets","offers":[{"title":"Default Title","offer_id":49260115198166,"sku":null,"price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/2413\/3334\/files\/HSDCessnaRedPNPArtboard1.png?v=1784144978","url":"https:\/\/flightproinc.com\/products\/hsd-flight-2000mm-cessna-182-pnp-red","provider":"Flight Pro","version":"1.0","type":"link"}