Flight Pro TWIN X14 Preloaded Model Combo – FMS Ranger 1220mm & PA-18 1300mm

Flight Pro TWIN X14 Preloaded Model Combo – FMS Ranger 1220mm & PA-18 1300mm

The Flight Pro TWIN X14 Preloaded Model Combo gives FMS pilots a professionally configured FrSky radio system designed specifically for the FMS Ranger 1220mm and FMS PA-18 1300mm. Each combo is preloaded with custom Flight Pro model files, prebound to the included FrSky TW R8 receiver, and configured for direct integration with the factory FMS Reflex stabilization system.

This is not just a transmitter and receiver bundle. It is a ready-to-install radio solution built to simplify setup, preserve the aircraft’s Reflex gyro functions, and add advanced FrSky features such as telemetry alerts, voice callouts, dual rates, flap control, and aircraft-specific switch assignments.

No setup. No guesswork. Just install, verify, and fly.

TWIN X14 Transmitter – Custom Programmed for FMS Aircraft

The FrSky TWIN X14 is a compact, full-featured transmitter running FrSky’s powerful ETHOS operating system. With dual active 2.4GHz TW protocol, Hall sensor gimbals, voice alerts, vibration feedback, USB-C charging, and up to 24 channels, the X14 gives pilots professional-level control in a portable radio platform.

Each Flight Pro combo is programmed and tested before shipment with model files specifically built for the FMS Ranger 1220mm and FMS PA-18 1300mm.

Preloaded Aircraft Model Files

FMS Ranger 1220mm
FMS PA-18 1300mm
Flight Pro Master Model File

The included Master Model File can be cloned and edited for future aircraft, giving you a strong starting point for additional FMS models or custom aircraft setups. Instead of building every model from scratch, you can copy the master file, rename it, adjust channels or switches as needed, and build from a clean Flight Pro-tested layout.

Direct FMS Reflex Integration

The Ranger 1220mm and PA-18 1300mm model files are configured to work directly with the factory FMS Reflex stabilization system. This allows the aircraft to retain its built-in stabilization features while giving the pilot upgraded control through the FrSky TWIN X14.

Reflex-related functions are assigned and ready, including stabilization mode selection and recovery/auto-level control where supported by the aircraft setup.

Preprogrammed Features

Direct integration with the FMS Reflex stabilization system
Reflex mode selection
Panic / Auto-Level recovery switch
Dual rates
Flap control with voice callouts
Reverse thrust setup for the FMS PA-18 1300mm
Battery voltage telemetry
Low battery voice warning
Critical battery voice alert
Flight mode announcements
Aircraft-specific switch assignments
Master Model File for future model setup

FMS Ranger 1220mm Programming

The Ranger 1220mm model file is built around the factory Reflex system and beginner-friendly flight control layout. The setup is designed to make the Ranger easier to operate while still giving the pilot access to more advanced FrSky radio features.

Configured Features:

Aileron, elevator, rudder, and throttle setup
FMS Reflex stabilization mode control
Panic / Auto-Level recovery switch
Dual rates
Battery voltage telemetry
Low battery and critical battery voice alerts
Voice-guided switch feedback
Clean channel layout for easy review and future adjustment

FMS PA-18 1300mm Programming

The PA-18 1300mm model file is configured to support the aircraft’s expanded features, including flaps, Reflex stabilization, and reverse thrust.

Configured Features:

Aileron, elevator, rudder, and throttle setup
FMS Reflex stabilization mode control
Panic / Auto-Level recovery switch
Flaps with voice callouts
Reverse thrust assignment
Dual rates
Battery voltage telemetry
Low battery and critical battery voice alerts
Voice-guided switch feedback
Aircraft-specific layout for the PA-18 1300mm

FrSky TW R8 Receiver – Prebound and Ready to Install

The included FrSky TW R8 receiver arrives prebound to the TWIN X14 transmitter and ready to connect to the aircraft. The TW R8 uses FrSky’s TWIN protocol with dual active 2.4GHz operation, meaning both 2.4GHz links operate at the same time rather than relying on a basic standby backup system.

This active-active signal design helps provide improved signal stability, better interference resistance, and a more dependable control link for serious RC pilots.

TW R8 Features

Dual active 2.4GHz TW protocol
8 PWM output channels
SBUS Out with 16CH / 24CH support
SBUS In for signal redundancy
FBUS / S.Port telemetry support
Single-wire FBUS support for simplified installations
Black Box function
Long-range control capability
Over-The-Air OTA firmware update support
Compact and lightweight design

TW R8 Specifications

Frequency: Dual 2.4GHz TW Protocol
Dimensions: 54 × 20 × 10 mm
Weight: 9.8g
Operating Voltage: 3.5–12V
Operating Current: 80mA @ 5V
External Voltage Monitoring AIN2: 0–36V
Antenna Connector: IPEX4
Compatibility: FrSky TWIN Series radios and RF modules operating in TW mode

TWIN X14 Radio Features

Dual active 2.4GHz TW protocol
TW / ACCESS / ACCST D16 support
ETHOS operating system
High-precision Hall sensor gimbals
2.95" 640 × 360 color display
Compact ergonomic chassis
USB-C charging
2S LiPo battery support
Voice alerts and vibration feedback
PARA wireless trainer mode
Lite external module bay compatible with Crossfire / ELRS modules
Up to 24 channels

What’s Included

FrSky TWIN X14 transmitter
FrSky TW R8 receiver
Receiver prebound to transmitter
Flight Pro preloaded aircraft model files
FMS Ranger 1220mm model file
FMS PA-18 1300mm model file
Flight Pro Master Model File
FrSky transmitter battery
FrSky carrying case
Quick start guide

Perfect For

FMS Ranger 1220mm owners
FMS PA-18 1300mm owners
New pilots who want to avoid complicated radio setup
Intermediate pilots upgrading from basic RTF transmitters
Experienced pilots who want a clean FrSky ETHOS setup
Pilots who want to keep the factory FMS Reflex stabilization system
Customers wanting telemetry alerts, voice callouts, and better switch control
Pilots who want a reusable master file for future aircraft

Flight Pro Advantage

Every Flight Pro TWIN X14 Preloaded Model Combo is individually configured, programmed, bound, and tested before shipment. The goal is to give FMS pilots a cleaner, easier, and more capable radio system without requiring them to build the setup from scratch.

No receiver binding required.
No channel mapping from zero.
No Reflex setup guesswork.
No flap programming from scratch.
No reverse thrust setup from scratch on the PA-18.
No telemetry alert setup from scratch.

Tested. Tuned. Ready to Fly.

Setup and Support Videos

For general ETHOS model setup, cloning model files, switch assignment basics, and future aircraft programming, visit the Flight Pro YouTube channel:

Flight Pro YouTube Channel

Compatibility Note

This combo is designed around FrSky TWIN Series equipment using TW protocol. The included TW R8 receiver is compatible with FrSky TWIN Series radios and TW-mode RF modules, including the TWIN X14 and TWIN X14S lineup.

This combo is specifically preprogrammed for the FMS Ranger 1220mm and FMS PA-18 1300mm using the included TW R8 receiver. Final control direction checks, failsafe verification, range checks, and preflight inspections must always be performed before flight.