Flight Pro Tandem X18 Combo – With TD Stabilized Receiver
Flight Pro Tandem X18 Combo – With TD Stabilized Receiver
Couldn't load pickup availability
Flight Pro Tandem X18 Combo – Pick Your Receiver (TD SR6 or TD SR10)
Get the cleanest, most flexible starting point for your FMS aircraft. The Flight Pro X18 Standard Combo includes a professionally preconfigured FrSky Tandem X18 transmitter, your choice of TD receiver (SR6 or SR10), and your choice of model profile option—so you can start simple or start fully dialed.
FrSky Tandem X18 Transmitter – Dual-Band Performance, Zero Compromise
A high-end, dual-band radio built for reliability, precision, and comfort in the air.
Key Features
- Simultaneous 2.4GHz + 900MHz operation for maximum link security
- Ultra-low latency (as low as 4ms) with full telemetry feedback
- ETHOS OS with a clean, customizable interface
- Hall-sensor gimbals for smooth, accurate control
- Rounded grips and expanded trim options for comfort
- Supports TD, ACCESS, and ACCST D16 protocols
- Rear Lite module bay for 3rd-party modules
- USB-C charging and bright full-color display
Your Choice of Receiver – TD SR6 or TD SR10
Choose the receiver that matches your aircraft’s needs—both are fully supported by the X18 and deliver premium dual-band performance.
TD SR6 – 6-Channel Dual-Band Stabilized Receiver
- True 2.4GHz + 900MHz simultaneous link
- 6 PWM channels + SBUS Out
- Auto-Level, Hover, Knife-Edge, and advanced stabilization modes
- Configurable outputs in Advanced Mode
- Black Box signal/power logging
- OTA firmware updates
TD SR10 – 10-Channel Dual-Band Receiver
- Dual-band 2.4GHz + 900MHz redundancy
- 10 PWM outputs + SBUS and FBUS
- Ideal for larger or multi-servo aircraft
- Full telemetry, voltage sensing, and OTA updates
- Rock-solid long-range performance
Pick Your Model Profile Option
Option 1: No Model Profile Programming (Default)
You’ll receive the transmitter and receiver with no added model profile programming—a clean setup with no extra configuration work performed by Flight Pro. This is ideal if you already have your own profiles, mixes, and switch layout, or you want to build from scratch.
Option 2: Generic Flight Pro Model Profile (Recommended)
Want the fastest “ready to fly” starting point? Choose the Generic Profile and we’ll ship your X18 pre-bound to your selected TD SR6 or TD SR10, with a proven, standard layout already configured:
Standard Channel Map
- CH1: Aileron
- CH2: Elevator
- CH3: Throttle
- CH4: Rudder
- CH5: Flaps
- CH6: Gear
Preconfigured Features (Generic Profile)
- Flap-to-elevator mix
- Slow flaps (smooth up/down deployment)
- Aileron/rudder mix for coordinated flight
- Throttle cut
- Self-level “panic” button on the back of the transmitter
- Battery telemetry support up to 6S, with low and critical battery warnings
- Live stabilizer gain adjustment buttons (in-flight tuning)
- On-the-fly screen brightness and volume controls
- 3-mode stabilization + self-level modes programmed
- Low/Medium/High rates on a 3-position switch
- Plus additional quality-of-life setup refinements
Why this is the best way to start:
All you typically need to do is confirm servo directions are correct and adjust any personal preferences (like the model name/picture). We’ll include several model pictures preloaded so you can pick the closest match. Adding another aircraft later is simple—just clone the profile and tweak it, so all your switches and logic stay familiar across models.
What’s Included
Every Standard Combo includes:
- FrSky Tandem X18 (professionally configured by Flight Pro)
- Your choice of TD SR6 or TD SR10
- Flight Pro Carry Case
- Transmitter Battery
- Quick Start Tips
Perfect For
- Pilots who want a clean starting point that just works
- Owners of multiple FMS aircraft who want consistency across models
- Beginners who want fewer setup hurdles
- Advanced builders who prefer a reliable foundation they can customize
Have a Specific Setup in Mind?
If you plan to run ailerons on separate channels, want multiple gear channels, or have a custom channel/mix layout, send us a message before ordering so we can set it up correctly prior to shipment. Custom requests may add time to order fulfillment.
Straightforward. Reliable. Tuned for Flight Pro excellence.
Learn more at: ethos.frsky-rc.com
📊 X18 Series Comparison Chart
| Feature | X18 | X18R | X18RS |
|---|---|---|---|
| Dimensions (L×W×H) | 200×192×95mm | 200×192×98mm | 200×192×98mm |
| Weight (Excl./Incl. Battery) | 687g / 820g | 740g / 880g | 740g / 880g |
| Touchscreen Resolution | 480×320 | 800×480 | 800×480 |
| Gimbals | Hall-Sensor | MC18 CNC Hall-Sensor w/ 10 Ball-Bearings | MC18 CNC Hall-Sensor w/ 10 Ball-Bearings |
| Stick Travel Adjustment | Fixed | 45°/60° Adjustable (Tool Required) | 45°/60° Adjustable (Tool Required) |
| Built-in Flash Storage | Yes (Size not specified) | 512MB | 512MB |
| RF Module | TD-ISRM | TD-ISRM RS | TD-ISRM RS |
| Dual-Band Modes | TD, ACCESS, ACCST D16 | TD, TW, ACCESS, R9 ACCESS, ACCST D16 | TD, TW, ACCESS, R9 ACCESS, ACCST D16 |
| Redundant RF Linking | No | Yes (via SBUS IN/OUT) | Yes (via SBUS IN/OUT) |
| Gyroscope Sensor | No | Yes | Yes |
| Knobs/Trims | Plastic Caps | All-CNC Metal Caps | All-CNC Metal Caps |
| Antenna Handle | Standard | Robust Upgrade | Robust Upgrade |
| External Antenna Ports | No | Yes (LoRa Support) | Yes (LoRa Support) |
| Operating Voltage | 6.5–8.4V | 6.5–8.4V | 6.5–8.4V |
| Operating Current | 240mA@7.4V | 500mA@7.4V | 500mA@7.4V |
| Recharge Interface | USB-C | USB-C | USB-C |
| Color Options | Blue, Black, Red | Chameleon, Ruby Red, Meteorite Grey, Porcelain White | Chameleon, Ruby Red, Meteorite Grey, Porcelain White |
Share
